AFTER CHANGE MOTHERBOARD CAN NOT RUN WINDOWS

In most cases, after you replace the motherboard Windows becomes unbootable. When you load a windows blue screen (BSOD) error with the STOP 0x0000007B . This is due to the change of ATA / SATA bus controller.

BSOD STOP 0x0000007B after replacement motherboard

The fact that Windows can not change your own controller driver while loading. As a result, when loading the operating system simply loses a hard disk and can not continue loading.

The question arises: how to make the replacement of the motherboard without reinstalling the Windows ? After reinstalling Windows is not difficult, but it will lose all programs and settings. And this is often unacceptable!

Ways to replace the motherboard without reinstalling the OS three. If you have Windows 7, skip to option 3

Option 1 - the old motherboard is working (Windows XP)

If the old motherboard may boot into Windows XP, it is necessary to replace the IDE controller drivers, and SATA to standard.

To do this in the device manager open the controller properties (the name depends on the motherboard model). On the driver press the button Update .

Replacing the motherboard without reinstalling - IDE controller

On the issue of connecting to the internet to search for the driver responsible No, not this time and click Next . In the next window, select Install from a list or specific location and click Next . The driver search settings window that appears, select Do not search. I will choose the driver to install and click Next .

In the resulting window, select from a list of standard dual channel PCI IDE controller and click Next .

Change IDE controller to the motherboard replacement
After the driver installation is finished press Finish and restart the computer.

After downloading the check in the Device Manager that is installed IDE controller standard driver and turn off the computer.

If the driver selection is not listed standard IDE controller driver (for example, in the case of the SATA controller), you can simply remove the installed driver of the old motherboard controller. To do this in the Device Manager, right-click on the device and select the context menu Delete . After removing off the computer.

Now make a replacement motherboard with the new. Windows XP will boot without any problems. After that, it remains only to install the driver on a new motherboard to drive it!

Option 2 - loading with the old motherboard is not possible (Windows XP)

The second option replace the motherboard without reinstalling Windows XP longer than the first, and it should be used if the computer with the old motherboard does not start or can not be downloaded. We will need the Windows XP installation CD. If the drive is not present, the disk image can be downloaded (WinXP Professional SP3 package with integrated controller drivers, hard disk drives) here and burn it to a blank CD-R, for example, using DeepBurner 1.9 program (distribution can be downloaded free of charge here).

To restore Windows XP after you replace the motherboard , do the following:

Install the new motherboard, and connect all the devices.

Start booting from the Windows XP installation disk. On the first installation screen (shown below), press ENTER, to proceed with the installation of Windows XP.

Restoring Vindovz after changing motherboard
On the next screen, press F8 to accept the license agreement.

The install program will search for operating systems installed and lists them.

Restore Windows after replacing the motherboard

Select the operating system to restore and press the R . The further process is not much different from the usual installation Windows XP. The difference is that the installer will not ask on a hard disk partition to install the OS and will not offer to enter the computer name and user name. Be prepared to enter the license code for Windows XP and activate it after installation via the Internet.

After installation is complete, you must install all the drivers on the new motherboard. All programs, user files and operating system settings will remain the same.

Option 3 - Fix IDE controller driver in the registry (Windows 7)

In case of replacement of the motherboard without reinstalling Windows 7 is a bit more complicated. The previous 2 embodiment are not rolled. Restore Windows 7 with an update from the installation disc also does not work, because you can run this function only from pre-loaded operating system.

But do not worry! We help ERD Commander (swing image CD-ROM here, or make bootable USB flash drive USB ERD Commander). With it, we will make adjustments to the Windows 7 registry needed to boot on the new controller.

Let's start! Boot to the burned disc or USB drive. In the boot menu select the version of the ERD Commander 6.5 for Windows 7.

Selection of ERD Commander versions for download

The question "Initialize a network connection in the background?" answer No .

The question "Reassign drive letters ..." answer Yes .

Choosing a keyboard layout and click the button Next . Then, choose from the list of our operating system and click Next .

The choice of operating system, which will be connected to the ERD Commander

If the previous boot Windows 7 fails to start search key problems download.

Search key problems in the boot of Windows 7

Click Cancel to not waste time, because it means the restoration is launched in case of change of the motherboard will not help. The question "Stop troubleshooting?" answer Yes . Following reports that failed to resolve the problem, do not panic, and press Done .

Read more:   DOWNLOAD GOOGLE BROWSER FOR WINDOWS 7 COMPUTER

In the window that appears, select the item the Microsoft Diagnostics and of Recovery Toolset .

The first thing you need to remove the registry key

Now run the Registry Editor.

HKLM\\SYSTEM\\MountedDevices

Now you need to turn on startup services that load standard controller driver

IDE and SATA.

Open branch HKLM \\ SYSTEM \\ CurrentControlSet \\ services in the left pane of the Registry Editor. Now, we check the following sections in this thread: amdide , amdsata , amdxata , atapi , intelide , msahci , pciide . Parameter Start each should be equal 0h00000000 (0) . The value of Start = 0 - start service at Windows startup. If it is 0h00000003 (3) double-click on and change the value to 0 (shown below) parameter name (Start) and press OK .

Once start is set to the value 0 in all the above registry keys, registry editor close and restart the computer normally. In most cases, this is sufficient for a successful boot Windows 7. Now you need to install the drivers on the new motherboard.

If you do not help

If Realized steps do not help, and Windows 7 still does not load and an error STOP 0x0000007b, then the necessary controller driver is not loaded. Try to enable loading of all known operating system drivers.

For this set value Start equal to 0 in the following services: adp94xx , adpahci , adpu320 , aic78xx , amdsbs , arc , arcsas , elxstor , HpSAMD , iaStorV , iirsp , LSI_FC , LSI_SAS , LSI_SAS2 , LSI_SCSI , megasas , MegaSR , nfrd960 , nvraid , nvstor , ql2300 , ql40xx , SiSRaid2 , SiSRaid4 , vhdmp , vsmraid , aliide , cmdide , NVRAID , viaide .

Restarting the computer normally. The OS will boot.

Windows XP boot, too, can recover in a similar manner, but there is more and I will not describe in this article. Who are interested can read here.

That's all. Good luck!

INTERNET - [RESOLVED] AFTER REPLACEMENT CARD NO INTERNET AND COMPUTER ...

Hello! Replace the old motherboard with a new GeForce6100PM-M2 V2.0, but then I lost the Internet and the computer does not see the stick. On Site Download drivers for the card, connect the hard drive to the old board (otherwise it does not reset from files) copied the drivers, run the installation, but the entire set of weights 100 MB, you can install one single item - Driver mode lack nvidi - nichrome not understand what it is. In the Device Manager on your network card is not yellow exclamation mark, the drivers, as the properties reported are set, but the network connection is empty, and in the browser line drive in 192.168.100.1 for Huawei modem, but the computer even it does not want to go. Network connections are not created. USB drive is not recognized, although the mouse from the usb port is working properly. Windows requires usbhub20.sys file, although it is in the Windows folder -> System32 -> Drivers. After specifying the path leaves a message: An error occurred when installing the unit. And he says that the driver is not digitally signed. After you run the Network Setup Wizard, he gave a message: "Could not find the network equipment." ipconfig command panel Run arises and disappears immediately at startup.

Answer:

chipset driver weighs 133 MB. Inside it has a network controller driver, you are too lazy to verify this. Unpack it, locate the NIC driver and install manually forced from the Device Manager. The business is ...

Yes, I unpacked the archive, got out network card drivers, but the problem was that it is not displayed, and the packet scheduler miniport from the old network card in Device Manager. I ran the system on another motherboard and there in the manager immediately display the built-board devices, which immediately asked for the system to install the drivers and appeared the network icon (or rather the lack of a more cross).

Question: After replacing the switch of the computers can not map a network drive

I replaced the old to the new switch, and all for about 30% of my computers are not running a network drive, a ping to the server is running out and not connect want, try using the console, hipster, my computer

Answer: I understand it is necessary to run the desktop computer to the server.

code code
1 
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
C: \\ Documents and Settings \\ User > NBTSTAT -A 192.168.1.220 
 
Local Area Connection:
Node address IP: [192.168.40.25] Area Code: []
 
           the NetBIOS-name table of a remote computer
 
       Name Type Status
    ----- -----------------------------------------------
    the SERVER <00 > Unique Registered
    COMITETIMU <00> Group Registered
    SERVER <20> Unique Registered
 
    Location board (MAC) = E8-DE- 27-06-B2-37
 
 
LAN Connection 2:
node address IP: [192.168.2.3] area code: []
 
    The node was not found.
 
VirtualBox Host-Only Network:
Node address IP: [192.168.56.1] Area Code: []
 
    Host not found.
 
C: \\ Documents and Settings \\ User >

Added after 5 minutes

Read more:   WHY NOT START SETTING windose JACKET

In another un on the same server

code code
1 
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
C: \\ Documents and Settings \\ User > NBTSTAT -A 192.168.40.51 
 
LAN Connection:
Node address IP: [192.168.40.25] Area Code: []
 
    Host not found.
 
LAN Connection 2:
Node address IP: [192.168.2.3] Area Code: []
 
    Host not found.
 
VirtualBox Host-Only Network:
Node address IP: [192.168.56.1] Area Code: []
 
    Host not found.
 
C: \\ Documents and Settings \\ User >

On the second server

the first un

code code
1 
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
C: \\ Documents and Settings \\ User > NBTSTAT -A 192.168.1.221 
 
LAN Connection:
Node address IP: [192.168.40.25] Area Code: []
 
    Host not found.
 
LAN Connection 2:
Node address IP: [192.168.2.3] Area Code: []
 
    Host not found.
 
VirtualBox Host-Only Network:
Node address IP: [192.168.56.1] Area Code: []
 
    Host not found.
 
C: \\ Documents and Settings \\ User >

On the second server, the second un

code code
1 
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
C: \\ Documents and Settings \\ User > NBTSTAT -A 192.168.40.50 
 
Local Area Connection:
Node address IP: [192.168.40.25] Area Code: []
 
           the NetBIOS-name table of a remote computer
 
       Name Type Status
    ----- -----------------------------------------------
    SERVDEP <00 > Unique Registered
    SERVDEP <20> Unique Registered
    ZEMDEP <00> Group Registered
    ZEMDEP <1C> Group Registered
    ZEMDEP <1B> Unique Registered
    ZEMDEP <1E> Group Registered
    SERVDEP <03> Unique Registered
    SERVDEP $ <03> Unique Registered
    ZEMDEP <1D> unique Registered
    ..__ MSBROWSE __. <01> Group and Registered
    ADMINISTRATOR <03> Unique Registered
    _ $$$ SERVER <20> Group Registered
    NetMsgH <20> Unique Registered
 
    Address Card (MAC) = 00-17-31-39-F3-86
 
 
Local Area Connection 2:
Node address IP : [192.168.2.3] area code: []
 
    Host not found.
 
VirtualBox Host-Only Network:
Node address IP: [192.168.56.1] Area Code: []
 
    Host not found.
 
C: \\ Documents and Settings \\ User >

Question: The OS does not see the USB flash drive

Has set a new flash drive in a computer, it was identified, then I would like to format a ntfs To this end, the properties of the stick in the Device Manager by clicking the "Optimize for performance." After pressing the computer freezes, I pulled the stick, to unfreeze it, since then insert the USB flash drive, the sound when connected there, and that can not be identified. Then she put on another hard drive (same computer, same OS, just another drive is connected to a computer), it is interesting that the flash drive immediately identified, I again pressed the "Optimize for performance" (should be the same with the fat32 to ntfs translate), again depending PC, but this time I decided to wait. Waited for 8 minutes, after which it successfully formatted in ntfs, with pleasure, that the flash drive is not ruined, I moved to the first disc, put it, and it again there is not identified. All other flash card recognizes and that both rejected. While the flash drive is already known that the working and formatted. What to do? How to force the OS to see it?

I tried all usb connectors - all the same. I write in the section of operating systems, because there is a glitch OS.

Question: The OS does not see the USB flash drive

Has set a new flash drive in a computer, it was identified, then I would like to format a ntfs To this end, the properties of the stick in the Device Manager by clicking the "Optimize for performance." After pressing the computer freezes, I pulled the stick, to unfreeze it, since then insert the USB flash drive, the sound when connected there, and that can not be identified. Then she put on another hard drive (same computer, same OS, just another drive is connected to a computer), it is interesting that the flash drive immediately identified, I again pressed the "Optimize for performance" (should be the same with the fat32 to ntfs translate), again depending PC, but this time I decided to wait. Waited for 8 minutes, after which it successfully formatted in ntfs, with pleasure, that the flash drive is not ruined, I moved to the first disc, put it, and it again there is not identified. All other flash card recognizes and that both rejected. While the flash drive is already known that the working and formatted. What to do? How to force the OS to see it?

Read more:   Guide and Command Line WINDOWS

I tried all usb connectors - all the same. I write in the section of operating systems, because there is a glitch OS.

Question: After replacing the system board is behind the time in Windows

Windows 7 SP1 x64, all updates are installed.

After replacing the motherboard, while working in the operating system begins to keep time.

For example, once launched a computer - the right time is worth.

But as work begins to accumulate in the system time lag.

I tried to change the battery - did not help.

Because of what it could be?

How to fix?

Answer:

  • before installing the operating system, to BIOS to the latest version. Save your changes, restart the PC and make BIOS settings reset to their default values.
  • then update all the drivers with the card of.stranitsy

Yes. Could be so.

Good afternoon, today reset vin7, and faced with an internet connection. The computer does not see the network vayfay, even if connected through a cable in what could be the problem?

Answer: I here in the first picture I see a connection to an Internet

what is generally a problem?

is an Internet itself is, albeit via cable, and the pages can not be opened?

ipconfig -all at connection

What happened after?

where infa something?

Good all the time of day, forum users 🙂 general situation is this: there is a computer running Windows 8.1 .In one day ceased to see the stick and external hard drives, but the webcam is working and everything is OK just sees HDD and USB flash drive in Bios.Pri connecting external HDD, and stick sound of the connected device and HDD izdaot.Fleshka workers checked on two more reinstall kompah.Podumal, but then I would like to perehotelos 🙂 otremontirovat.Sdelal report in the "resource protection program windows" on the command line, and she found oshibki.otchot from this program prick replays and is also attached a report of aidy64.Pomogite please 🙂

Answer: Maybe.

Create a restore point, place that was removed for restoration of the system a little bit and reboot after each installation.

If a glitch arose because of the software, which was placed in the gap since the 17th, the way to find out who the culprit

Q: Without the inclusion of USB Legacy support does not see the stick, when the loading is very slow

Hello!

Motherboard MSI p45 Platinum

I put windows c USB 2.0

Without the inclusion in the BIOS USB Legacy support USB flash drive does not see (even the light is not illuminated), when the loading is very slow, 10 times slower than it should.

I tried several flash drives with different loaders.

Answer: In general found a way around the problem. Added to stick plop boot manager, boot from the USB drive, then plop boot manager to choose the boot again from the same USB drive is ready. Duration of windows is loading files .. fell somewhere in the 10-15 minutes to one minute.

After downloading the file from the Internet computer has become slow down, when you turn off the shows that are not closed background programs, but does not show any, and is presented in a browser tab automatically, which I kept to format the hard disk.

Answer: Warning! Recommendations written especially for the user Sokoi . If the recommendations are not written for you, do not use them - it can damage your system.

If you have a similar problem - create a theme in the section and perform.

______________________________________________________

Create a text file fixlist.txt in a folder Farbar Recovery Scan Tool.

Copy the text into it from a window "winbatch" below and save.

start
CreateRestorePoint:
2016-12-20 18:08 - 2016-12-21 21:27 - 00000000 ____D C:\\Users\\Все пользователи\\ProductData
2016-12-20 18:08 - 2016-12-21 21:27 - 00000000 ____D C:\\ProgramData\\ProductData
2016-12-20 18:08 - 2016-12-20 18:08 - 00000000 ____D C:\\Windows\\IObit
2016-12-20 18:07 - 2016-12-21 03:49 - 00002888 _____ C:\\Windows\\System32\\Tasks\\Driver Booster SkipUAC (sokoi)
2016-12-20 18:07 - 2016-12-20 18:55 - 00000000 ____D C:\\Users\\sokoi\\AppData\\Roaming\\IObit
2016-12-20 18:07 - 2016-12-20 18:08 - 00000000 ____D C:\\Users\\Все пользователи\\IObit
2016-12-20 18:07 - 2016-12-20 18:08 - 00000000 ____D C:\\Users\\sokoi\\AppData\\LocalLow\\IObit
2016-12-20 18:07 - 2016-12-20 18:08 - 00000000 ____D C:\\ProgramData\\IObit
Task: {F6EB18C6-A6C4-43BE-9801-47205DEC44B9} - System32\\Tasks\\Driver Booster SkipUAC (sokoi) => C:\\Program Files (x86)\\IObit\\Driver Booster\\4.1.0\\DriverBooster.exe
AlternateDataStreams: C:\\Users\\sokoi\\Desktop\\HDDLLF.4.40.exe:$CmdZnID [26]
EmptyTemp:
Reboot:
end

Turn off the antivirus software before rebooting, run FRST, click Fix and wait. The program creates a log file (Fixlog.txt). Attach it to your next post.

The computer will restart automatically.

Read more in.

Good day to all.

GPU was replaced on the laptop lenovo G565

And boot logo appears when Windows starts, and then a black screen, please tell me where that can be corrected, such as through a Live CD.

In order to solve this problem.

Read in other languages

 BelorussianEnglish Deutsch Spanish French Italian Portuguese Turkish Arab Ukrainian Swedish Hungarian Bulgarian Estonian Chinese (Simplified) Vietnamese Romanian Thai Slovenian Slovak Serbian Malay Norwegian Latvian Lithuanian Korean Japanese Indonesian Hindi Hebrew Finnish Greek Dutch Czech Danish Croatian Chinese (Traditional) Philippine Urdu Azeybardzhansky ArmenianPolish Bengal Georgian Kazakh Catalan Mongolski Russian Tadzhitsky Tamilʹskij telugu Uzbetsky

Add a comment

Your e-mail will not be published. Required fields are marked *